Load Cell driven system provides precise control of test force application and has direct digital reading. Engineered to obtain highly sensitive and accurate readings. Perfect for laboratories, workshops, tool rooms, inspection labs, etc. 测量范围3.18 - 650 hbw
- Load Cell driven system provides precise control of test force application
- 直接数字阅读
- Engineered to obtain highly sensitive and accurate readings
- Perfect for laboratories, workshops, tool rooms, inspection labs, etc.
- 测量范围:3.18 - 650 hbw
规格:
- Innovative closed-loop technology. The tester incorporates the latest load cell technology. The test load is applied via a closed-loop control unit with a load cell, a DC motor and an electronic measurement and control unit. The result is highly accurate Brinell hardness measurements at all test loads up to 0.5%. The common load overshoot or undershoot as known from traditional dead weight, 或开环, 系统将被淘汰. The absence of mechanical weights not only eliminates friction problems but also makes the equipment less sensitive to misalignments caused by vibrations.
- The gross weight of the tester is 50% less than the traditional dead weights type testers.
- Test load selection by keypad and shown on the LCD screen.
- Fully automatic test cycles. The Brinell hardness Tester features a fully automatic test cycle, 加载应用程序, 住, 卸货, is performed fully automatically. This greatly improves reproducibility of test results since operator influence is eliminated.
- Selectable 住 times by screen. The indenter, load, and other test information are shown clearly on the large LCD screen.
- 0的方向.102F/D2 ratios selecting according to the materials and hardness range can be showing on the screen.
- Equipped with a 20X optical microscope to measure the diameter of Brinell indention.
- Brinell Hardness Calculator (BHC) makes the hardness value calculation easy and convenient.
技术数据:
- 加载:3000 kgf (29400 n), 1500 kgf (14700 n), 1000 kgf (9800 n), 750 kgf (7355 n),500 kgf (4900 n), 250 kgf (2452 n), 187.5Kgf (1839N), 125Kgf (1226N),100Kgf (980N), 62.5 kgf (612.9N)
- Load 住 duration: 2s～99s, can be set and stored
- Tungsten Carbide Ball indenter: 10mm, 5mm, 2.5mm
- 测量范围:3.18 hbw ~ 658 hbw
- Magnification of the microscope: 20X
- Resolution capability of the microscope: 0.005mm
- Max measurable height: 430 mm (w/large anvil) 450mm (w/small anvil)
- Max measurable depth: 200 mm
- Dimensions: 600mm×300mm×1000mm
- Power supply: 220/110 V, 50/60 Hz, 4A
- 重量: 205kg (gross) 165kg(net)
